The versatility of Pneumatic excessive strain grouting pumps

Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the loose rock mass. The most grain size can not exceed zero.2 mm.
Grouting pump operation and upkeep is straightforward, safe and dependable. This pump is utilized in mines operating beneath troublesome conditions as a result of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base frame and stand, stress gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it works
Pneumatic strain in the air cylinder exerts a excessive stress on the grout mixture which outcomes in ejection of grout with a excessive stress and velocity. The valves of the air cylinder within the pump function mechanically to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to finish the pumping cycle.
Pneumatic grout pump could be driven even without Electrical energy supply in distant areas through the use of engine driven compressor.
Smooth sailing is majorly used in building and mining business for injecting materials into wide and medium size gap in beams, columns ,basement partitions and flooring, raise shaft concrete wall fill-up etc. In mining trade it is used to replenish cement resolution where there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to simple maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, building foundation, and other underground initiatives, and inflammable, explosive sites and different dangerous setting.
It has application in chemical business also to pump out chemical slurries.
The pump is electricity free so, can be used at any web site situation whether it is rural or urban.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment vary. Generally Anonymous of the grouting volume is 8 or10 occasions of the quantity at first. And the ultimate grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and circulate may be adjusted according to the necessities of grouting,(The flow of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, construction, mining etc. ground/underground construction.
Benefits
Mining Pneumatic Grouting pump has the advantages of low vitality consumption, small vibration, low noise, small dimension, high effectivity, dependable performance, stress and move management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it could be carried simply. It is designed for simple operation and low upkeep. Last but not least its spare parts are easily available.
Share

Leave a Comment